If your trailer has torsion axles, you’ll need to jack it up in a different way than if it had leaf springs. This is because torsion axles don’t have any suspension components that can be used to support the weight of the trailer when jacking it up. Instead, you’ll need to use a process called “torquing” to raise the trailer off the ground.

• In order to jack up a trailer with torsion axles, you will need to follow these steps: 1
• Park the trailer on level ground and set the parking brake
• Place a jack under the frame of the trailer, near one of the axles
• Crank the jack until it lifts the axle off the ground
• Repeat for the other axle
• Place blocks or chocks under each wheel to prevent rolling while working on the trailer

AlKo torsion axle on Rockwood trailer

How to Jack Up Dexter Axles

If you’re Dexter axle owner, at some point you’ll need to know how to jack up your trailer. Here’s a step-by-step guide on how to do it: 1. Park your trailer on level ground and set the emergency brake.

2. Place blocks under the wheels on both sides of the trailer so it can’t roll when you jack it up. 3. Find the jacking points on the Dexter axle – there should be two, one on each side of the axle. 4. Place your jack at one of the jacking points and slowly start to raise the trailer until the wheel is off the ground.

Repeat on the other side. 5. Now that both wheels are off the ground, you can move them around as needed for maintenance or repairs.

Credit: www.airforums.com

Where Do You Jack a Torsion Axle?

If you’re planning on jacking up a torsion axle, there are a few things you need to keep in mind. First, you’ll need to identify the location of the axle. Second, you’ll need to support the axle before jacking it up.

And third, you’ll need to use the proper jack for the job. The first step is to find the torsion axle on your vehicle. This is typically located near the center of the vehicle, underneath the frame.

Once you’ve found it, clean off any dirt or debris so that you have a clear view of it. Next, support the torsion axle before jacking it up. You can do this by placing Jack stands under each end of the axle.

Be sure to place them securely and double-check that they’re in place before moving on. Finally, use a floor jack or bottle jack to lift up the torsion axle until it’s high enough for you to work on it safely. Keep in mind that torsion axles are heavy, so be sure to use a jack that can handle the weight.

With all these steps in mind, jacking up a torsion axle is easy and safe!

Can I Jack My Trailer Up from the Axle?

There are a few different ways that you can jack up your trailer from the axle. The most common way is to use a floor jack. You will need to place the floor jack under the axle and then raise it up until the tire is off the ground.

Another way is to use a bumper jack. This method is not as common, but it will work if you do not have a floor jack. You will need to place the bumper jack under the trailer and then raise it up until the tire is off the ground.

How Do You Adjust Torsion Trailer Axles?

If your trailer has torsion axles, you may need to adjust them from time to time. Torsion axles work by suspending the trailer body from springs that are mounted on the axle. The amount of tension in the springs can be adjusted to change the ride height of the trailer.

To adjust torsion trailer axles, you will need a torque wrench and a socket that fits the axle nut. You will also need a way to measure the ride height of the trailer, such as a tape measure or ruler. First, measure the ride height of your trailer at all four corners.

Record these measurements so you can reference them later. Next, loosen the axle nut with your torque wrench and socket. Do not remove the nut completely, just loosen it enough that you can turn it by hand.

Will Trailer Aid Work on Torsion Axles?

If you have a torsion axle on your trailer, you may be wondering if a trailer aid will work to help you change a tire. The answer is yes! A trailer aid can be used on torsion axles to help make changing a tire easier.

Here’s how it works: the trailer aid sits under the good tire on the opposite side of the flat tire. This provides leverage so that when you jack up the flat tire, the good tire will take some of the weight and make it easier to remove the flat tire. Once the flat tire is off, you can then put on the spare and lower everything back down.

A trailer aid is a great tool to have if you frequently find yourself changing tires on your trailer. It can save you time and hassle, and make sure that you get back on the road quickly and safely.

Conclusion

If your trailer has torsion axles, you may be wondering how to go about jacking it up. Here’s a step-by-step guide: 1. Park your trailer on level ground and set the parking brake.

2. Place a jack under the frame of the trailer, near the axle that you want to raise. 3. Slowly turn the jack handle clockwise to raise the axle off the ground. 4. Once the axle is raised high enough, place a block of wood or another object under the tire to keep it from rolling while you work.