How to Jack Up a Tacoma

Andre L. McCain

If you find yourself in need of jacking up your Tacoma, there are a few things you’ll need to do first. First, gather all the materials you’ll need: a floor jack, two jack stands, and a lug wrench. Next, park your Tacoma on level ground and engage the parking brake.

Place the floor jack under the frame rail behind the front wheel on the driver’s side and raise the jack until it makes contact with the frame.

  • Park the Tacoma on a level surface and chock the wheels to prevent it from rolling while you’re jacking it up
  • Place the jack under the frame of the Tacoma, making sure that it’s positioned correctly so that it won’t slip off when you start lifting
  • Pump the jack handle to lift the Tacoma off the ground
  • Stop when the tires are clear of the ground and make sure that the Tacoma is stable before continuing
  • Lower the jack slowly until it’s touching the ground again, then remove it from underneath the Tacoma

Safe Tips and Tricks on Raising your 3rd Gen Toyota Tacoma

Toyota Tacoma Jack Kit

If you’re a Toyota Tacoma owner, then you know that one of the most important things to have on hand is a jack kit. These kits are essential for lifting up your truck so that you can change a tire or perform other maintenance tasks. But what exactly should you look for in a jack kit?

Here’s a rundown of the features that any good Toyota Tacoma jack kit should have. First and foremost, it’s important to make sure that the jack itself is made of high-quality materials. After all, this is what’s going to be doing the heavy lifting!

Look for something like aircraft-grade aluminum, which is both strong and lightweight. The last thing you want is for your jack to fail while you’re in the middle of changing a tire. Next, take a look at the included stands.

These should be made of similarly high-quality materials as the jack itself, and they should be easy to set up and use. Ideally, they’ll also have some sort of locking mechanism to keep them securely in place while you’re working. Finally, consider any extras that might come in handy with your jack kit.

A carrying case is always nice, as it keeps everything organized and makes it easy to transport from one location to another. And if you do a lot of off-roading in your Tacoma, then consider investing in a recovery winch attachment – this can come in very handy if you ever get stuck in mud or sand!

How to Jack Up a Tacoma


Where Do I Put the Jack under My Truck?

Assuming you need to change a tire: The jack should be placed under the frame of the vehicle on the side that you will be changing the tire on. There should be a notch or depression in the frame where the jack can fit snugly.

Once the jack is in place, pump it until the tire is lifted off of the ground.

Where Do You Put the Jack on a Toyota?

If you need to change a tire on your Toyota, you’ll need to know where to find the jack. The location of the jack varies depending on the model of Toyota, but it’s usually located in one of three places: under the floor mat in the trunk, under the rear seat or in front of the passenger side wheel well. To access the jack in most Toyotas, first remove any cargo or floor mats from the trunk.

Then, locate a small access panel either under the carpeting or on top of the spare tire. Once you’ve found the access panel, open it and remove the jack handle from its holder. Now that you have everything you need, it’s time to get to work!

Position your Toyota so that the flat tire is closest to an object that you can use as a support (like a curb). Then, using your owner’s manual as a reference, follow these steps: 1. Place your Toyota’s transmission in Park (for automatic transmissions) or Neutral (for manual transmissions).

2. Set your parking brake for extra safety. 3. Find the right spot to place your jack – there should be a metal plate with an embossed outline of where to place it underneath your car near each wheel well. 4. Insert your jack into this outline and begin cranking until the flat tire is raised off ofthe ground about six inches.

How Do You Use a Tire Jack on a Toyota Tacoma?

If you’re a driver, sooner or later you’ll need to know how to use a tire jack. Many newer cars have jacks that are integrated into the design of the vehicle, but if you drive an older model Toyota Tacoma, chances are your jack is stored in the truck bed. Here’s how to use it:

1. Park your Tacoma on level ground and set the parking brake. Loosen the lug nuts on the wheel that you’ll be changing with the jack. Do not remove them yet.

2. Find the location of your jack point – this is usually indicated by a small circle or triangle icon on your frame near the wheel well. Place the jack at this point and begin cranking it until the wheel is lifted off of the ground. 3. Finish removing your lug nuts and take off the flat tire.

Put on your spare tire, making sure to hand-tighten each lug nut before lowering your truck back down to the ground. Once all four tires are touching pavement again, go ahead and finish tightening each lug nut with a Lug Wrench until they’re snug (don’t overdo it – these don’t need to be “overtightened”).

Can You Use a High Lift Jack on a Tacoma?

If you have ever wondered if you can use a high lift jack on a Tacoma, the answer is yes! High lift jacks are a great way to get your truck lifted off the ground so that you can change a tire or work on other repairs. The best part about using a high lift jack is that they are very easy to operate and don’t require any special training.

All you need to do is follow the instructions that come with the jack and you will be able to safely and easily lift your Tacoma off the ground.


If you need to jack up your Tacoma, there are a few things you’ll need to do. First, find a level spot on which to park your truck. Once you’ve found a suitable spot, chock the wheels on the opposite side of the one you’ll be jacking up.

Next, locate the jack points on your Tacoma. There are three different jack points: two in the front and one in the rear. Once you’ve located them, place the jack under the frame and begin jacking up your truck.

When lifting your truck, be sure to use caution and go slowly to avoid damaging it.

Leave a Comment