There are two types of crossovers that audio enthusiasts can use to route different frequencies to their speakers: a 60 Hz crossover or an 80 Hz crossover. The main difference between the two is the frequency at which they filter out low-frequency sounds. A 60 Hz crossover will remove any sound below 60 Hz from the signal, while an 80 Hz crossover will remove any sound below 80 Hz.
This means that a 60 Hz crossover will allow some low-frequency sounds to reach the speaker, while an 80 Hz crossover will block them out completely. Audio enthusiasts can choose which type of crossover to use based on their personal preferences and the type of music they listen to.
If you’re a audio enthusiast, you’ve probably come across the debate of whether to use a 60 Hz or 80 Hz crossover. Here’s a quick rundown of the pros and cons of each so you can make the best decision for your setup.
60 Hz Pros:
-Allows for better speaker efficiency
-Reduces bass distortion
-Gives tighter bass response
60 Hz Cons:
-May not be able to adequately reproduce low frequencies (below 60 Hz)
80 Hz Pros:
-Better at reproducing low frequencies (below 80 Hz)
-Allows for more headroom before distortion occurs
80 Hz Cons:
-Not as efficient as a 60 Hz crossover
Credit: www.youtube.com
Why is 80 Hz the Best Crossover?
When it comes to setting up a car audio system, one of the most important decisions is choosing the crossover frequency. The crossover frequency is the point at which your speakers start to roll off and your subwoofers take over.
There are a lot of different opinions out there about what the best crossover frequency is, but the vast majority of experts agree that 80 Hz is the sweet spot.
Here’s why:
1. 80 Hz Is The Point Where Most Speakers Start To Roll Off
The human ear can theoretically hear frequencies all the way down to 20 Hz, but our ability to actually perceive those low frequencies starts to drop off around 80 Hz.
That’s why most speakers have a hard time reproducing really low bass notes.
2. Your Subwoofers Will Thank You
If you set your crossover frequency any lower than 80 Hz, your subwoofers are going to have to work overtime just to keep up with the music.
Not only will this put a strain on your subs, it will also decrease their overall efficiency and make them more prone to distortion. By crossing over at 80 Hz, you’re giving your subs a much easier job and ensuring that they’ll sound their best.
3. It Saves You Money In The Long Run
If you set your crossover too low (below 60 Hz), you’ll probably be tempted to buy larger, more powerful subwoofers in order to get enough bass output. However, this isn’t always necessary – and it definitely isn’t cost-effective! By crossing over at 80 Hz instead of 60 Hz, you can save yourself some money and still get plenty of punchy bass from your subwoofers.
What Hz Should My Crossover Be?
There’s a lot of debate out there about what the ideal crossover frequency is for a given subwoofer. And while there’s no definitive answer, there are some general guidelines you can follow.
First, it’s important to understand that the crossover frequency is the point at which your subwoofer will start to roll off, or decrease in volume.
So if you have a subwoofer with a low pass filter set at 80 Hz, that means any frequencies below 80 Hz will be attenuated (reduced in volume).
Ideally, you want your crossover frequency to be as low as possible without causing any problems with your main speakers. The reason for this is because the lower frequencies are what give bass its impact and authority.
If those frequencies are rolled off too early, you’ll lose some of that impact.
On the other hand, if you set your crossover too low, you run the risk of overworking your subwoofer and causing distortion. This is why it’s important to find a balance between these two factors.
Generally speaking, most people recommend setting your crossover somewhere between 60-80 Hz for music listening. For movies and TV shows however, where there tends to be more bass content, you may want to set it closer to 40-60 Hz.
Of course, these are just general guidelines and ultimately it’s up to you to experiment and find what sounds best in your specific setup.
What Frequency Should I Set My Subwoofer Crossover?
This is a great question! The answer, unfortunately, is not so simple. It depends on a number of factors, including the type of subwoofer you have, the size of your room, and your personal preferences.
The first thing you need to do is figure out what frequency range your subwoofer is capable of reproducing. Most subwoofers will have this information in their specifications. Once you know that, you can start to narrow down where you want to set the crossover point.
If you have a smaller room, or if you don’t want the bass to be too overwhelming, it’s generally best to set the crossover point somewhere in the middle of the subwoofer’s frequency range. This will ensure that the bass is still audible without being too overpowering.
If you have a larger room or if you want more powerful bass, you can set the crossover point closer to the lower end of the subwoofer’s frequency range.
This will give you more boom but may make dialogue and other midrange sounds less distinct.
Ultimately, it comes down to experimentation and finding what sounds best to you. Start with the crossover point in the middle of your subwoofer’s range and adjust from there until you find something that works for your particular setup.
Is 80Hz Sub Bass?
No, 80Hz is not sub bass. Sub bass frequencies are typically below 80Hz.
Is 80hz The Right Crossover For Your System ? Probably Not…
Subwoofer Crossover 80Hz Or 120Hz
There are a lot of opinions out there about what the best crossover frequency is for a subwoofer. Some say that 80Hz is the way to go, while others claim that 120Hz is the ideal number. So which is it?
The answer may surprise you – it depends on your setup and what you’re trying to achieve. Let’s take a look at both options and see what each one has to offer.
80Hz Crossover:
The main advantage of using an 80Hz crossover for your subwoofer is that it allows the sub to reproduce low frequencies more accurately. This results in tighter, more precise bass that can really fill out your music or movie soundtrack.
If you have smaller speakers in your system, an 80Hz crossover can also help them by taking some of the strain off of their woofers.
This can result in less distortion and better overall sound quality from your system as a whole.
120Hz Crossover:
On the other hand, some people prefer using a 120Hz crossover frequency for their subwoofers.
The main benefit of this approach is that it allows the sub to blend in better with your main speakers. This creates a smoother overall soundscape with less obvious bass lines.
If you have floor-standing speakers or large bookshelf models, they likely already extend down into the lower frequencies pretty well on their own.
In this case, using a 120Hz crossover for your subwoofer can help keep things sounding balanced and natural without muddying up the midrange too much..
Conclusion
If you’re in the market for speakers, you might be wondering what the difference is between a 60 Hz and 80 Hz crossover. Here’s a quick rundown:
60 Hz crossover: The lower frequency range (bass) is sent to the woofer, while the upper frequency range (treble) is sent to the tweeter.
This results in less distortion and better sound quality overall.
80 Hz crossover: The lower frequency range (bass) is sent to both the woofer and the tweeter. This can create more distortion, but some people prefer the extra bass response.
